Replacing the Cooling Fan on X.Mio3/LE4 Boards
Replacing the Cooling Fan on X.Mio3/LE4 Boards
Put the board on a flat/insulated soft base. Do neither bend, nor apply weight.
1) Unplug the power wire from the board base;
2) Remove the three screws one by one gently;
3) Gently remove the fan from the heat-sink.
4) Gently put the new fan on and position it properly;
5) Put the three screws back on, tight them properly (warning: do not over torque screw that it may damage the thread);
6) Re-connect the power wire, make sure the power wire is properly positioned.
7) Cautiously, make a few spinning to see that the fan moves freely;
8) Put the board back to slot, and turn the power on;
9) Watch if the new fan works fine;
Comments
0 comments
Please sign in to leave a comment.